KDT KD-612 KS Throughfeed drilling/routing CNC MACHINE

CNC Throughfeed Drilling/routing KDT KD-612 KS MACHINE

The CNC KDT KD-612MHS is a highly productive flow machine for drilling, milling and sawing. It features three independent drilling units that allow two workpieces to be machined simultaneously, ensuring high productivity. Two drilling heads are from above, one from below. This machine has the advantage of side drilling with two units from the top. The lower drilling unit has a smaller external dimension in order to minimise the opening for maximum support of the workpiece during drilling and, consequently, greater precision.

The machine is easy to operate on a personal industrial PC with Windows environment and the user-friendly KDT DrillTop software. A barcode scanner is included for barcode work. The machine is ONLINE service enabled with TeamViewer. Programs can be created both on the machine and in the office. It is possible to connect the machine to programs such as MegaTISCHLER, Corpus 3D, LestrojBox, Alphacam and Solidworks. The software is easy to use, graphically supported and parametric.

The KD-612MHS is also equipped with two independent milling units for grooves and cut-outs. The machine also has two integrated 120 mm diameter slotting saws for the production of the back grooves.

The CNC machine is equipped with a pair of independent clamps and automatically re-grips the clamps according to the position of the holes. The length of the clamps guides is 5500 mm for machining long pieces without over gripping the clamps. The entry air table is for easier feed of workpieces, especially workpieces with delicate surfaces. A cross conveyor system ensures that the workpiece is moved out of the machine.

The double clamps are designed for faster work and more precise gripping. The conveyor belt is designed to feed the waste material out of the machine.

The KDT KD-612 KS CNC Throughfeed Drilling/routing machine is easy to use as it requires no mechanical set-up and, with the use of barcodes, does not require an experienced user directly on the machine.

Technical characteristics and equipment of the machine:

- three independent drilling units + two milling units,

- two independent drilling units (above) with 12 + 8 drill bits,

- one drilling unit (bottom) with 9 vertical drill bits,

- machining on all six sides,

- two milling units, 5,5 kW (top) and 3.5 kW (bottom) - increases the flexibility of the machine, top + bottom,

- integrated saw with 120 mm diameter and 4 mm thickness,

- industrial PC with Windows environment and KDT software, controller,

- dual independent clamps,

- bar code scanner,

- infeed air table + outfeed cross conveyor for returning workpieces,

- safety guards and CE certification,

- workpiece length: 200-2850 mm,

- workpiece width: 50-1200 mm,

- workpiece thickness: 9-60 mm,

- clamps feed speed: 140 m/min,

- overall dimensions: 7626 × 3847 × 2190 mm,

- total power input: 25,58 kW,

- weight: 3500 kg.